牺牲镁阳极定制各种尺寸规格产品

牺牲镁阳极定制各种尺寸规格产品

     密封套选用强度较高的塑料制成，从而保证与镁棒的紧固配合;绝缘套选用塑性较高的塑料制成，可保证安装之后表面不出现裂纹防止渗水。为了保证钢帽与镁棒在使用过程中不发生脱离，借助冲压设备在钢帽螺纹下沿的圆环进行收口紧固，通过钢帽预变形力增加与镁棒的紧固力。总之，这种阳极材料带电阻的镁阳极棒与传统的镁阳极棒相比，其较大的优点体现在通过串联一个不同阻值大小的分压电阻以调节阳极棒与内胆的电压差，仅仅通过装配环节中的一个微小电阻值的调换就可以使镁棒达到既可以在良好水环境又可以在较差水环境中使用的通用性目的，避免了传统的必须更换阳极棒基体材质(镁或铝)的繁琐与浪费。下面通过附图和具体实施方式对这种阳极材料做进一步说明，但并不意味着对这种阳极材料保护范围的限制。
       可实现废水回回用、增加企业供水容量、降低生产成本的铝阳极氧化废水处理方法。公司具备良好的镁合金牺牲阳极生产技术实力，高效的管理体系，*的质检平台，优秀的服务水准，这种阳极材料的优点:这种阳极材料中，基体镁棒与热水器内胆并非如传统阳极采用的直接通过钢帽实现导通，而是先通过分压电阻降压后，再与热水器内胆相连接，有效降低了阳极棒的腐蚀速率。为了恰当地安装电阻到镁棒与钢帽之间，这种阳极材料采用了绝缘套与密封套的过渡连接方式。首先将电阻置于绝缘套与密封套之间，将电阻的一脚与镁棒铁芯焊接，并采用粘结或焊接的方式对绝缘套和密封进行连接和密封，安装好钢帽之后再将电阻的另一脚与钢帽焊接。这样的安装结构方式，既保证了钢帽与镁棒通过电阻实现了导通，又确保了水或水汽不会从两个塑料套的连接缝隙中渗入电阻引脚与铁芯焊点处引发腐蚀断路。愿与国内外客商及各界朋友携手合作，同心同德、同创锌业，开创更加美好的未来！

The sealing sleeve is made of plastic with higher strength so as to ensure the fastening fit with the magnesium rod.  The insulating sleeve is made of plastic with higher plasticity, which can ensure that no cracks will appear on the surface after installation to prevent water seepage.  In order to ensure that the steel cap does not separate from the magnesium rod during use, the ring at the lower edge of the screw thread of the steel cap is closed and fastened by means of punching equipment, and the fastening force with the magnesium rod is increased through the pre-deformation force of the steel cap.  In short, compared with the traditional magnesium anode rod, the biggest advantage of this kind of magnesium anode rod with resistance is that the voltage difference between the anode rod and the inner container can be adjusted by connecting a voltage dividing resistor with different resistance values in series. the magnesium rod can achieve the purpose of universality that can be used in both good water environment and poor water environment only by exchanging a small resistance value in the assembly link, thus avoiding the tedious and waste that the traditional anode rod base material ( magnesium or aluminum ) must be replaced.  This anode material will be further explained below through the drawings and specific embodiments, but it is not meant to limit the scope of protection of this anode material.


公司的交易方法和服务
交易方式:现金、支付宝、快递/物流收款、分期付款、月度结算等。让买家可以放心订购。
此外，该公司库存产品的规格和数量将继续变化，顾客在订购时可能无法获得足够的库存供应，但我们将快速配送货物，以便顾客可以放心。
此外，特殊规格的材料可以根据客户的需求定制！
1193178453